Short on Space and Labour? Why Robotic Palletising Is the Smartest First Step in Automation

Wednesday, October 07, 2026

The productivity squeeze on Australian warehouses

Australia's productivity problem is not sitting at a desk. It is sitting on the warehouse floor.

The Productivity Commission's June 2026 bulletin showed labour productivity fell 0.6% in the March quarter, with annual growth of just 0.3%. In the market sector, productivity dropped 0.7% while hours worked rose 2.2%. Put simply, businesses are putting in more hours and getting less out of each one.

The pressure is sharpest in the industries that make, store, move and sell physical goods. Manufacturing, wholesale, retail, transport and warehousing generated $493 billion in industry value added in 2024/25 and account for roughly a quarter of all hours worked in Australia. As Dematic Australia's Phillip Makowski put it: "Australian businesses are not short on effort. They are short on capacity."


Why automation is the new path to productivity

Warehouse operators have traditionally had three levers when demand grows: more space, more people or more shifts. All three are getting harder to pull.

  • Space is scarce. CBRE put the national industrial vacancy rate at 3.2% in the first half of 2026, with a structural shortage of serviced, appropriately zoned land.
  • Labour is expensive and hard to find. Physically demanding roles are among the hardest to fill and keep.
  • Order volumes keep fragmenting. Australians spent $82.6 billion online in 2025, up 14% on the year, with an average basket of around $90. More small orders mean more individual handling for every dollar of revenue.

That last point is the one many businesses miss. Revenue can grow while cost to serve quietly climbs, because the number of physical touches rises faster than the money coming in.

Automation adds a fourth lever: getting more out of the footprint and the team you already have. It does not replace good people. It moves them off repetitive, injury-prone tasks and onto work that needs judgement.


Palletising: the smartest first step into robotics

If you are deciding where to start, look at the end of the line. Packing and palletising is now the second most common automation category worldwide.

The reasons are practical. Palletising is repetitive, predictable and physically punishing. It is often staffed by the people hardest to retain, and it is a common source of strain injuries. It is also a self-contained task, so it can be automated without redesigning the whole site.

Notice what is driving the decision. It is stability and consistency, not raw speed. A robot that stacks every pallet the same way, every shift, removes a bottleneck and a safety risk in one move.

We have seen this first-hand. On a stacking and handling project for Corinthian Doors, our automation processed more than 32,500 stacks, cut labour costs by $320,000 and reduced product damage by 70%.

Choosing the right palletising cell

There is no single right robot. The best fit depends on your product, your volumes and the space you have at the end of the line.


Type
Best suited to
Best suited to
Six-axis industrial robot
High volumes, mixed product sizes, multiple pallets from one arm
Needs more floor space and full safety guarding 
Collaborative robot (cobot)
Lighter goods, slower lines, sites that need quick install and easy changeover
Lower payload and slower cycle times
Gantry or Cartesian
Lighter goods, slower lines, sites that need quick install and easy changeover
Less flexible when products or layouts change
AMR-mounted palletiser
Lighter loads shared across several lines
Lower speed and payload


The robot is only half the story. The gripper is where palletising systems succeed or fail. Vacuum grippers suit cartons and bags, while mechanical clamps and magnetic grippers handle heavier or irregular loads. Vision guidance can now detect carton orientation and adjust on the fly.

Five questions to answer before you invest

  • What is the main driver? Labour reduction, ergonomics and throughput stability each lead to a different design and a different return on investment.
  • How much space do you really have? Map conveyor positions, pallet drop-off points, ceiling height and forklift or AMR access before anything is specified.
  • How varied is your product mix? Frequent changes in carton size, weight or packaging may call for quick-change tooling and flexible programming.
  • How will safety be built in? Scanners, light curtains and guarding should be designed in from day one, not added at the end.
  • What happens either side of the cell? Palletising connects to wrapping, labelling and transport. Plan the whole flow, or the bottleneck simply moves.

The most common mistakes are over-specifying features that add cost without value, underestimating space constraints, and comparing proposals that are not like for like.


How Fast Automation can help

Our recommendation follows your operation, not a product catalogue. Since 1998, Fast Automation has delivered more than 2,000 projects in every Australian state and territory, along with global support for clients.

  • ABB Authorised Value Provider, with experience across ABB, KUKA, FANUC, Siemens, Rockwell, Omron, Mitsubishi and Schneider.
  • End-to-end delivery: concept design and 3D modelling, robotics, controls, safety, commissioning and ongoing support
  • Certified quality and safety: certified quality systems, with TÜV certified safety engineers

Space is not getting cheaper and labour is not getting easier to find. The productivity gain must come from the operation itself, and the end of the line is often the best place to start.

Ready to see what a palletising cell could do for your site? Talk to our engineering team on 1300 752 397, email info@fast-automation.com or book a site assessment through our contact page.



< Back to post list